WLDH-2200 mixing machine
WLDH-2200 mixing machine is my company for the domestic production of salt salt varieties required for the research and development of large horizontal mixing machine, with firm mechanism, driving force, fast mixing characteristics, currently has more than 10 sets in Chongqing Hechuan salt, Jiangsu Ruifeng, Jiangsu bridge, Yunnan salt, salt and other multiple Xingan the company used very satisfied customer response.
Details of the plan
WLDH-2200 mixer with domestic ordinary mixing machine technology parameter table:
|
Serial number
|
Comparison project
|
WLDH-2200 mixing machine
|
Domestic ordinary mixing machine
|
|
One
|
The cylinder wall thickness
|
5 mm
|
3 to 4 mm
|
|
Two
|
Spindle configuration
|
133 mm stainless steel tube (embedded in carbon steel)
|
121 mm stainless steel tube (embedded in carbon steel)
|
|
Three
|
On both sides of wall thickness
|
12 mm
|
8 to 10 mm
|
|
Four
|
The stirring rod
|
46 mm in diameter
|
20 mm in diameter
|
|
Five
|
Mixing blade
|
12X10 mm
|
10X8 mm
|
|
Six
|
Reducer configuration
|
BWD-17-30KW
|
BWD-15-18.5KW
|
|
Seven
|
Feeding gate
|
Cast steel arc door, closed after the cylinder and round on the same curve, mixing without any dead
|
Ordinary flat gate, mixed with the dead
|
|
Eight
|
Polishing process
|
The mirror polishing process, the whole machine as bright as a mirror, and the inner wall of main material is not deposited
|
Ordinary polishing, and the inner wall of the main shaft is easy to be accumulated material
|
Applicable scope
WLDH series spiral trough type mixing machine is the introduction of foreign advanced technology, the technical staff of our company digestion, new product innovation, as a new type of efficient mixing machine, widely used in chemical, pharmaceutical, fertilizer, dyes, pigments, food, feed, and other industries (solid solid solid material), solid (powder and liquid mixed materials).
Working principle
WLDH- series spiral trough type mixing machine with high efficiency, fast mixing material, the spiral stirring shaft with motion, the inner and outer screw with turning in a wide range of materials, the inner spiral belt material to the feed side drive, outer spiral belt material to the discharge side movement, causes the material to flow back. At the same time, the formation of recycling screw with circumferential churning material, which makes the material get mixed quickly and evenly in a relatively short period of time.
Structural characteristics
WLDH- series spiral trough type mixing machine structure mainly consists of motor, reducer, rack, couplings, bearings, shaft seals, stirring spiral ribbons, outlet, cylinder, cylinder cover, outlet, cleaning and other components.
1 the machine is a horizontal cylinder, the main shaft is provided with two layers of inner and outer spiral belt, has a unique structure, stable operation, reliable quality, low noise, long service life, easy installation and maintenance.
2 fast mixing speed, high mixing uniformity, especially suitable for the mixing of viscous material.
3 in the mixture of different material requirements (special materials must be cleaned after each mixing), using different spiral band structure, can be customized with jacket heating and drying.
4 special atomized liquid, can be customized to install special nozzle.
5 horizontal body cover. The movable door, so that the user or put cleaning materials.
6 feeding door is closed after the steel arc gate, and the cylinder body in the same circular curve, mixing without any dead.
7 body with mirror polishing process, the whole machine as bright as a mirror, and the inner wall of main material is not deposited.
technical parameter
Model. WLDH-2200
A mixed amount of ------1000 to 1500kg
Motor power ------30KW speed: 29 rpm;
The loading coefficient is less than 0.6.
The particle size of ------20-200.
The mixing uniformity, the relative deviation is less than 1.5
The outlet ------250X250mm
Size (length X width X height) ------2200X1020X1200mm
The weight of ------2200kg
The cylinder wall thickness: 6 mm spindle diameter: 133 mm (embedded in carbon steel)
On both sides of the wall thickness: 12 mm stirring rod diameter: 46 mm